新聞資訊【NEWS】more>>
行業新聞

當前位置:網站首頁 > 新聞資訊 > 行業新聞

  • 鋁格柵的施工工藝
  • 本站編輯:杭州歐宏建材有限公司發布日期:2019-10-10 21:47 瀏覽次數:
鋁格柵吊頂工藝流程、操作工藝
1.確定好高度,在墻上用墨斗彈高水平線
2.用鐵的膨脹栓把吊筋固定在頂上,吊筋下面固定輕鋼龍骨要保持水平(如果格柵跨度不超過3米就不需要吊筋了)
3.用水泥釘把鋁角線沿水平線釘好
4.把鋁格柵放地上組拼完整
5.把組拼好的格柵天花放在鋁角鐵上面,中間的位置用細鐵絲直接扎在輕鋼龍骨上.

Aluminum grille hoisting process and operation technology
1. Determine the height and use ink to bomb the high level on the wall
2. Use an iron expansion bolt to fix the hamstring to the top, and fix the light steel keel under the hamstring to maintain the horizontal(if the grid span does not exceed 3 meters, no hamstring is required)
3. Pin the aluminum diagonal along the horizontal line with cement nails
4. Put the aluminum grille on the ground and complete it
5. Place the grille ceiling of the group on the aluminum corner iron, and the middle position is directly tied to the keel of light steel with fine wire.
赌博输了几十万我想死