新聞資訊【NEWS】more>>
行業新聞

當前位置:網站首頁 > 新聞資訊 > 行業新聞

  • 鋁方通的選擇技巧
  • 本站編輯:杭州歐宏建材有限公司發布日期:2019-06-02 14:51 瀏覽次數:
第一、材質。
市場上的鋁材主要有以下幾種:按鋁材的產地分為普通鋁材、廣鋁、西南鋁;按鋁材的國際標號又分為1100、3003、5005等標號;按鋁材的合金強度分為H24、H18等;按鋁材的韌性分為普通鋁材、鋁鎂合金、鋁錳合金。市場上銷售的吊頂材料中大部分都采用普通的鋁材,其特點是強度低,平整度一般,韌性強,不變形。沒有好的基材,會大大影響鋁方通的使用壽命。
第二、表面處理。
鋁方通的表面處理主要有以下幾種:噴涂、烤漆、滾涂、覆膜。其中噴涂、烤漆使用壽命短,容易出現色差,滾涂使用壽命居中,覆膜板又可分為普通膜與進口膜,進口膜的使用壽命基本上能達到20年不變色。
第三、工藝。
所謂工藝就是板材有表層的粘合,這是消費者比較忽略的一塊。如果工藝不好對于產品的使用壽命影響非常大,市場上的鋁方通廠家處理工藝有很大的區別,很多小廠基本上是采取作坊式、工藝壽命降低。建議進行鋁方通選擇時,一定要了解清楚這一塊。
First, the material.
The aluminum materials on the market are mainly the following: According to the origin of aluminum materials, they are divided into ordinary aluminum, broad aluminum, and Southwest aluminum; According to the international label of aluminum, it is divided into 1100, 3003, 5005 and other label numbers; According to the strength of aluminum alloy divided into H24, H18 and so on; According to the toughness of aluminum, it is divided into ordinary aluminum, aluminum magnesium alloy and aluminum manganese alloy. Most of the ceiling materials sold on the market use ordinary aluminum materials, which are characterized by low strength, general flatness, strong toughness, and no deformation. Without a good substrate, it will greatly affect the service life of aluminum Fangtong.
Second, surface treatment.
The surface treatment of aluminum Fangtong mainly includes the following types: spraying, baking paint, rolling coating, coating. Among them, spraying and baking paint have a short service life, which is prone to color difference. The roll coating service life is centered, and the coating plate can be divided into ordinary membrane and imported membrane. The service life of imported membrane can basically reach 20 years without discoloration.
Third, the process.
The so-called process is the surface of the plate adhesion, which is a relatively neglected consumer. If the process is not good for the product's service life is very large, the processing process of aluminum Fangtong manufacturers on the market is very different. Many small factories basically adopt the workshop type and the process life is reduced. It is recommended that when selecting aluminum through the square, you must understand this piece clearly.
赌博输了几十万我想死